Infineon XE/XC/16x Processor Modules
Phytec modules are designed to reduce time to market and allow engineers to concentrate on their design rather than re-inventing the wheel.
16x Boards and Modules
|
Keil 16x Compilers |
|
|
Tasking 16x Compilers |
|
|
Infineon 16x Pages |
|
|
Contact a Hitex Engineer |
phyCORE®-ST10F269 HS/E
High Speed 16-Bit SOM Offering CAN & Ethernet
The phyCORE-167/ST10 HS/E (High-Speed Ethernet) supports various 144-pin devices in MQFP package from Infineon and STMicroelectronics. The board offers up to 1 MB external SRAM, 2 MB external Flash and supports on-board in-system (ISP) Flash programming. If populated with the C167CS or the ST10F269 or ST10F168, the module offers an additional 256 KB on-chip Flash.
phyCORE®-167
High Performance 16-bit with on-chip CAN and Flash
The phyCORE-167/ST10F168 supports high-end 16-bit controllers from Infineon featuring on-chip CAN and Flash. The module is intended for use in memory-intensive applications and in driving a CAN-bus interface. Smaller than a credit card (60 x 53 mm.), the standard board is populated with the Infineon C167CR controller, runs at a 20 MHz clock speed and offers a standard external memory of 256 KB (to 1 MB) SRAM and 256 KB (to 2 MB) Flash.
phyCORE®-167 HS/E
High Speed 16-Bit SOM Offering CAN & Ethernet
The phyCORE-167/ST10 HS/E (High-Speed Ethernet) supports various 144-pin devices in MQFP package from Infineon and STMicroelectronics. The board offers up to 1 MB external SRAM, 2 MB external Flash and supports on-board in-system (ISP) Flash programming. If populated with the C167CS or the ST10F269 or ST10F168, the module offers an additional 256 KB on-chip Flash.
phyCORE®-XC167
16-bit sub-mini SOM with CAN, Ethernet and OCDS
The phyCORE-XC167 belongs to PHYTEC's phyCORE System on Module family and supports the XC167CI controller from Infineon in TQFP-144-50 housing. The Flash can easily be programmed on board. Support of the XC16x family "Single Chip Mode" provides the user with maximum flexibility for expansion via external peripherals.
phyCORE®-XC161
16-bit sub-mini SOM with CAN, Ethernet and OCDS
The phyCORE-XC161 belongs to PHYTEC's phyCORE System on Module family and supports the XC161CJ controller from Infineon in TQFP-144-50 housing. The Flash can easily be programmed on board. Support of the XC16x family "Single Chip Mode" provides the user with maximum flexibility for expansion via external peripherals. An additional feature is the possibility of connecting the CAN interface from within the address area, whereby direct external addressing of up to 16 MB address space is enabled. On-Chip Full 2.0B CAN, 99 I/O lines and two serial interfaces are additional board features.
