Phytec ARM Modules

• phyCORE ARM11/i.MX31 - Multimedia, Ethernet, USB and LCD controler.
• phyCORE ARM9/i.MX27 - with HiDEF Video and Ethernet.
• phyCORE ARM9/LPC3250 - Small Form factor, Power Management, USB, Ethernet and LCD controler
• phyCORE ARM9/LPC3180 - Low Power, USB OTG, Ultra low power mode.
• phyCORE ARM7/LPC2294 - 4xCAN, Ethernet, Subminature SBC.
• phyCORE ARM7/AT91M55800A - Ethernet, 4x UART, 8-ch ADC, 2-ch DAC and JTAG

Emtrion ARM Modules

• HiCO.ARM9-SBC - USB Host & Device, 4 Serial, LCD Controler, -40⁰C.. +85⁰C optional

• DIMM-MX257 - Freescale ARM9 i.MX257 400Mhz Processor, <1.5Watts, 2xCAN, Ethernet, 4x Serial, Reference baseboard and application development kit available for Linux and Windows CE6.0 R3

Keil ARM Evaluation boards  - comparison chart

• The Keil MCB2100 Evaluation Board introduces you to the NXP (founded by Philips) LPC2129 family of ARM processor-based devices. The MCB2100 allows you to quickly create and test programs for this advanced architecture.
  The Keil MCB2100 Evaluation Board connects to your PC using the serial port (for Flash download using FlashMagic) or the JTAG interface (for program debug using a Keil ULINK family USB-JTAG Adapter and the µVision IDE and Debugger).
  Two Serial and two CAN interfaces make this board a great starting point for your next ARM project.

• The Keil MCB2103 Evaluation Board introduces you to the NXP (founded by Philips) LPC2103 ARM family and allows you to create and test working programs for this advanced architecture.
  
  The Keil MCB2103 Evaluation Board connects to your PC using the serial port (for Flash download using FlashMagic) or the JTAG interface (for program debug using a Keil ULINK family USB-JTAG Adapter and the µVision IDE and Debugger).

• The Keil MCB2140 Evaluation Board introduces you to the NXP (founded by Philips) LPC2140 ARM family and allows you to create and test working programs for this advanced architecture.
  
  The Keil MCB2140 Evaluation Board connects to your PC using the serial port (for Flash download using FlashMagic) or the JTAG interface (for program debug using a Keil ULINK family USB-JTAG Adapter and the µVision IDE and Debugger).
  
  An on-chip USB interface, two serial interfaces, a speaker, analog input (via potentiometer), and eight LEDs make this board a great starting point for your next ARM project.http://www.keil.com/arm/mcb2103/

• The Keil MCB2300 Evaluation Board introduces you to the NXP (founded by Philips) LPC2300 ARM family and allows you to create and test working programs for this advanced architecture.
  
  Two serial interfaces, a speaker, analog input (via potentiometer), two CAN interfaces, LCD, USB, Ethernet, and eight LEDs make this board a great starting point for your next ARM project.

• The Keil MCB2460 Evaluation Board introduces the NXP LPC2460 ARM family. It allows you to create and test working programs for this architecture.
  
  Two CAN & serial interfaces, analog input, QVGA LCD w/touch screen, USB, and Ethernet make this board a great starting point for your ARM project.

• The Keil MCBSTR7 Evaluation Board introduces you to the STMicroelectronics STR710 ARM family and allows you to create and test working programs for this advanced architecture.
  
  The Keil MCBSTR7 Evaluation Board connects to your PC using the serial port (for Flash download) or the JTAG interface (for program debug using the Keil ULINK USB-JTAG Adapter and the µVision IDE and Debugger).
  
  Serial and CAN interfaces, eight LEDs, and analog input (via potentiometer) make this board a great starting point for your next ARM project.

• The Keil MCBSTR730 Evaluation Board introduces you to the STMicroelectronics STR730 ARM family and allows you to create and test working programs for this advanced architecture.
  
  The Keil MCBSTR730 Evaluation Board connects to your PC using the serial port (for Flash download) or the JTAG interface (for program debug using the Keil ULINK USB-JTAG Adapter and the µVision IDE and Debugger).
  
  Serial and CAN interfaces, 7-segment LED display, and analog input (via potentiometer) make this board a great starting point for your next ARM project.

• The Keil MCBSTR750 Evaluation Board introduces you to the STMicroelectronics STR750 ARM family and allows you to create and test working programs for this advanced architecture.
  
  The Keil MCBSTR750 Evaluation Board connects to your PC using the serial port (for Flash download) or the JTAG interface (for program debug using the Keil ULINK USB-JTAG Adapter and the µVision IDE and Debugger).
  
  Two serial interfaces, a speaker, analog input (via potentiometer), one CAN interfaces, LCD, USB, and eight LEDs make this board a great starting point for your next ARM project.

TQ have recently announced a  new embedded processor module and starter-kit based on the Freescale i.MX35 processor.

Called the TQMa35, the module measures 44 x 54 mm, has a typical power consumption of 2-3 watts, and provides interfaces for digital camera and 24-bit TFT display.

Development support and I/O expansion are provided by the STKa35 starter-kit board and software tools