Starter Kits and BSPs

When selecting an appropriate board or module the search often starts with the Operating System. Therefore we have grouped the starter kits we supply with Board Support Packages (BSPs) as standard in an easy to find way.

These Starter Kits all have the drivers for standard peripherals built in saving you valuable time and expense. Many also come with manufacturers utilities and features to ease your development process. Modules have reference baseboards and schematics available so your hardware engineer can start development at the same time as your software engineer.

However, if there is a module or non standard driver you require then please contact us as we have many years of experience in adaptation and development and can customise packages depending on your individual requirements.

Please click on the logos below to be taken to the relevant starter kits for your requirements.

 

Linux Starter Kits and BSPs

Starterkit-COM Express 6 PLUS

    

  • Live Linux USB stick with SEMA
  • Schematics, design guide & user manuals
  • Documentation, drivers, BSPs, libraries
  • Heatspreader and heatsink
  • Express-BASE6 reference carrier board
  • COM Express Type 6 Module
  • CPU, Memory

nanoX Starter Kit Plus

   

  • COM Express® Type 10 core module
  • Thermal solution (heatspreader or heatsink)
  • miniBASE-10R reference carrier board
  • LVDS flat panel evaluation kit (optional)
  • Schematics, design guide and user manuals
  • Documentation, drivers, BSPs and libraries
  • Live USB with Ubuntu and SEMA

COM Express Type 2 Starter Kit

   

  • COM Express Type 2 Module
  • CPU, Memory
  • Express-BASE reference carrier board
  • Heatspreader and heatsink
  • Schematics, Design Guide, and User Manuals
  • Documentation, drivers, BSPs and libraries

LEC-Starterkit R2

    

  • SMARC compliant LEC-BASE R1 carrier board
  • SD card and USB stick
  • Interface cables (one way open) for camera, GPIO, power management, SPI, I2C and LVDS
  • AC/DC adapter, power cord and universal socket

Q7-Starterkit R1

     

  • Qseven compliant Q7-BASE R1 carrier board
  • SD card and USB stick
  • 300 Watt ATX power supply

CoreModule 920

      

  • Dual-core 3rd Generation Intel® Core™ Processor
  • Up to 4GB industrial grade solder down ECC 1600MHz DDR3 memory
  • One HDMI, one VGA, and one 18/24-bit LVDS display interfaces
  • 8GB industrial grade Solid State Disk
  • One PCIe x16 (Gen 3) and 1 x4 or 4 x1 (Gen 2)
  • Two SATA 6 Gb/s ports, two Gigabit Ethernet, four USB 2.0 interfaces, and two serial ports
  • PCI/104-Express Type 1 and PCI/104 expansion interfaces
  • Extreme Rugged™ operating temperature: -40°C to +85°C

ReadyBoard 910

   

  • 2nd/3rd Generation Intel® Core™ i7/i5/i3 Processor
  • Dual Gigabit Ethernet
  • USB 3.0 with SuperSpeed 5Gb/s Data Transfer Rate
  • Analog VGA, LVDS and DVI-D display
  • PCI Express Mini Card socket; PCI-104 expansion
  • Onboard SSD

AmITX-SL-G

   

  • 6th Gen Intel Core i7/i5/i3, Intel Pentium G4400/G4400TE and Celeron G3900/G3900TE Desktop Processor with Intel® Q170/H110 Chipsets
  • Up to 32 GB dual channel DDR4 at 2133 MHz
  • Intel Gen 9 graphics, 3x DP, LVDS co-lay with eDP (opt.)
  • 1x PCIe x16 (Gen 3), 1x PCIe x1 (Gen 2), 1x full size Mini PCIe + USB or mSATA, 1x half size Mini PCIe + USB, 1x SPI header for external BIOS
  • Q170: 7x USB 3.0, 4x USB 2.0; H110: 4x USB 3.0, 7x USB 2.0

CM1-BT1

    

  • Single/Dual-core Intel® Atom™ Processor System-on-Chip
  • Up to 4GB DDR3L at 1333MHz
  • Supports VGA and LVDS
  • GbE (optional 2x GbE)
  • 1x SATA 3Gb/s (optional 2x SATA), 3x USB 2.0, 8x GPIO
  • Extreme Rugged™ operating temperature range: -40°C to +85°C
  • Supports Smart Embedded Management Agent (SEMA)

CM1-86DX3 PC/104 SBC

     

  • Ultra low power, DM&P Vortex86DX3 SoC
  • Full ISA bus support
  • 2GB soldered DDR3L
  • 1x GbE, 1x Fast Ethernet
  • SATA, CFast
  • VGA and 18/24-bit single channel TTL/TFT
  • Supports Smart Embedded Management Agent (SEMA)

CM1-86DX2 PC/104 SBC

      

  • Single, dual or quad-core Intel® Atom™ or Celeron® Processors
  • Up to 4GB DDR3L at 1333MHz
  • Supports VGA and LVDS
  • GbE, 1x SATA 3Gb/s
  • 3x USB 2.0, 8x GPIO
  • Extreme Rugged™ operating temperature: -40°C +85°C
  • Supports Smart Embedded Management Agent (SEMA)

Starterkit STKLS102x

        

  • 3x Ethernet 10/100/1000 Mbit (IEEE 1588)
  • 4x FlexCAN
  • 1x USB 2.0 High-Speed OTG Interface
  • 1x USB 3.0 High-Speed Host Interface
  • 6x UART

DIMM-MX6 Dev Kit Linux

     

  • More Info
  • Get me a quote
  • Download a datasheet

  • CPU Module DIMM-MX6 Quad mounted on DIMM-Base Cadun
  • With power supply
  • Pre-installed OS
  • TFT Display with resistive Touch on Plexiglas mount
  • Also available with DIMM-MX6 Dual and Solo module

    DIMM-MX6 Dev Kit PCIe Linux

       

    • CPU Module DIMM-MX6 Quad mounted on DIMM-Base Tarion
    • With power supply
    • Pre-installed OS
    • TFT Display with resistive Touch on Plexiglas mount
    • Also available with DIMM-MX6 Dual and Solo module

      emCON-MX6 Dev Kit Linux

         

      • CPU Module emCON-MX6 Quad mounted on emCON-Base Avari
      • With power supply
      • Pre-installed OS
      • TFT Display with capacitive Touch on Plexiglas mount
      • Also available with emCON-MX6 Dual and Solo module

      LEC-Starterkit R1

         

      • SMARC compliant LEC-BASE R1 carrier board
      • 7” flat panel 800 x 400 display with assembly and USB touch cable
      • SD card and USB stick
      • Interface cables for camera, GPIO, power management, I2S and SPI
      • AC/DC adapter, power cord and universal socket

      Starterkit STKa53

         

      • 2x Ethernet 10/100 Mbit/s
      • 4x USB
      • 1x Dual LVDS
      • 2x CAN

      DIMM-MX53x Dev Kit Linux

         

      • CPU Module DIMM-MX537 mounted on DIMM-Base Verno
      • With power supply
      • Pre-installed OS
      • TFT Display with resistive touch on plexiglas mount
      • Also available with DIMM-MX535 module and/or display with capacitive touch

      DIMM-RZ/A1H Development Kit Linux

         

      • Starter Kit for Renesas RZ/A1H and Linux
      • CPU-Modul: DIMM-RZ/A1H
      • Baseboard: Verno
      • Display Unit UMSH-8272MD
      • Operating System: Linux

      Starter kit STKa335x for AM3359 TQ modules

        

      • Starter kit for TQMa335x
      • 2x Ethernet 10/100/1000 Mbit/s
      • 4x USB
      • 1x LVDS
      • 2x CAN

      DIMM-AM335x Development Kit Linux

        

      • Low-cost due to highest levels of integration
      • Compact dimensions
      • Extended temperature range
      • 2x IEEE1588 Ethernet (L2 Switch)
      • Low power consumption (typ. 1 W)
      • Long-term availability
      • Power management
      • IEC 61850 stack

      DIMM-AM335x Dev Kit Linux

                 
          

      • Starter Kit for TI AM335x with Linux and Display
      • CPU-Module: DIMM-AM335x
      • Baseboard: Verno
      • Display Unit UMSH-8272MD
      • Operating System: Linux Debian 8.0 and Yocto 1.7.2

      DIMM-AM335x Development Kit Linux plus

             

      • Starter kit for TI AM335x with Linux and Display
      • CPU-Module: DIMM-AM335x
      • Baseboard: Lothron
      • Display Unit UMSH-8272MD
      • Operating System: Linux Yocto 1.7.2 Debian 8.0

      Starterkit STKa28 for i.MX28 TQ modules

              

      • Starter kit for TQMa28
      • 2x Ethernet 10/100 Mbit/s
      • 2x USB
      • 1x RS232
      • 1x RS485
      • 2x CAN

      Starterkit baseboard STKT104x for QoriQ P-Series based modules

        

      • 2x PCIe x1 upgrading plug-in positions for e.g. SSD & graphic cards
      • 1x SATA Interfaces (up to 2x, according to configuration)
      • Up to 8x Gigabit Ethernet Ports for maximal I/O-Performance (depending on the module variant and configuration)
      • 1x Display Interface (LVDS)
      • Shunts for measuring the power consumption of the module, PCIe slots and of the baseboard. This enables an easy estimation of the power requirement and therefore the dimensioning of the cooling connection in the application

      DIMM-M257 Development Kit Linux

         
           

      • Starter Kit for NXP i.MX257 with Linux and Display
      • CPU-Module: DIMM-MX257
      • Baseboard: Verno
      • Display Unit UMSH-8272MD
      • Operating System: Linux

      Embedded module TQM5200 with MPC5200

         

      • NXP MPC5200 (Power Architecture), 400 MHz
      • High graphics performance through integrated graphics controller
      • Substantial computing power, numerous interfaces
      • Multifunctional external busses (PCI / ATA / IDE)
      • Compact outer dimensions (80mm x 60mm)
      • Low power dissipation, passive cooling
      • Robust 0,8mm mezzanine connection system, long-term availability

      Starterkit baseboard STKP2020 for TQ QorIQ P-Series modules

         

      • 2x PCIe (x1) upgrading plug-in positions e.g. SSD, PCIe-to-SATA cards, graphic cards etc
      • 3x Gigabit Ethernet ports for maximum I/O performance with IEEE1588 support for synchronism intime of shared systems in nano seconds range
      • Shunts for measuring the power consumption of the module, PCIe slots and of the baseboard. This enables an easy estimation of the power requirement and therefore the dimensioning of the cooling connection in the application

      Yocto Linux Starter Kits and BSPs

      LEC-Starterkit R2

           

      • SMARC compliant LEC-BASE R1 carrier board
      • SD card and USB stick
      • Interface cables (one way open) for camera, GPIO, power management, SPI, I2C and LVDS
      • AC/DC adapter, power cord and universal socket

      Q7-Starterkit R1

         

      • Qseven compliant Q7-BASE R1 carrier board
      • SD card and USB stick
      • 300 Watt ATX power supply

      DIMM-MX6 Dev Kit Linux

         

      • Starter Kit for NXP i.MX6 with Linux and Display
      • CPU-Module: DIMM-MX6
      • Baseboard: Cadun
      • Display Unit UMSH-8272MD
      • Operating System: Linux

      DIMM-MX6 Dev Kit PCIe Linux

           

      • Particularly suitable for evaluating hardware and application development on Linux with additional PCIe modules.
      • CPU-Module: DIMM-MX6-PCIe
      • Baseboard: Tarion
      • Display Unit UMSH-8272MD
      • Operating System: Linux

      LEC-Starterkit R1

        

      • SMARC compliant LEC-BASE R1 carrier board
      • 7” flat panel 800 x 400 display with assembly and USB touch cable
      • SD card and USB stick
      • Interface cables for camera, GPIO, power management, I2S and SPI
      • AC/DC adapter, power cord and universal socket

      DIMM-MX53x Dev Kit Linux

            

      • Starter Kit for NXP i.MX53x with Linux and Display
      • CPU-Module: DIMM-MX53
      • Baseboard: Verno
      • Display Unit UMSH-8272MD
      • Operating System: Linux

      DIMM-AM335x Dev Kit Linux

                 
          

      • Starter Kit for TI AM335x with Linux and Display
      • CPU-Module: DIMM-AM335x
      • Baseboard: Verno
      • Display Unit UMSH-8272MD
      • Operating System: Linux Debian 8.0 and Yocto 1.7.2

      DIMM-AM335x Development Kit Linux plus

             

      • Starter kit for TI AM335x with Linux and Display
      • CPU-Module: DIMM-AM335x
      • Baseboard: Lothron
      • Display Unit UMSH-8272MD
      • Operating System: Linux Yocto 1.7.2 Debian 8.0

      DIMM-RZ-A1H Dev Kit Linux

                
       

      • Starter Kit for Renesas RZ/A1H and Linux
      • CPU-Module: DIMM-RZ/A1H
      • Baseboard: Verno
      • Display Unit UMSH-8272MD
      • Operating System: Linux

      DIMM-M257 Development Kit Linux

            

      • Starter Kit for NXP i.MX257 with Linux and Display
      • CPU-Module: DIMM-MX257
      • Baseboard: Verno
      • Display Unit UMSH-8272MD
      • Operating System: Linux

      SBC-SAMA5D36 Dev Kit Linux, headless

         

      • Developer Kit for Atmel-SAMA5D36 and Linux, headless
      • CPU-Modul: SBC-SAMA5D36
      • Operating System: Linux

      LEC-BTS SMARC® Short Size Module

           

      • Single, dual or quad-core Intel® Atom™ Processor E3800 Series System-on-Chip
      • Up to 4 GB DDR3L at 1066/1333 MHz (non-ECC)
      • HDMI and LVDS
      • GbE, camera interface
      • 1x SATA 3Gb/s, 1x USB 3.0, 3x USB 2.0, max. 12x GPIO
      • Extreme Rugged™ operating temperature: -40°C to +85°C

      Q7-BT with 4th Generation Intel® Atom™ Processor

         

      • Single, dual or quad core 4th Generation Intel® Atom™ Processor E3800 Series System-on-Chip
      • Up to 4 GB DDR3L at 1066/1333 MHz
      • HDMI 1.4b and dual channel LVDS
      • GbE, MIPI CSI camera interface
      • 2x SATA 3Gb/s or 1x SATA and 1x SATA-SSD
      • Extreme Rugged™ -40°C to +85°C
      • Supports Smart Embedded Management Agent (SEMA)

      nanoX-BT with Intel Atom E3800 series SoC or Celeron Processors

            

      • Single, dual, quad-core Intel Atom or Celeron Processor System-on-Chip
      • Up to 4GB soldered Dual Channel DDR3L at 1333MHz
      • One DDI channel, one LVDS (optional eDP)
      • Three PCIe x1, GbE
      • Two SATA 3Gb/s, four USB and one USB client
      • Supports Smart Embedded Management Agent (SEMA) functions
      • Extreme Rugged operating temperature: -40C to +85C (optional)
      • Starter kit for development: nanoX-BT starter kit Plus; Carrier Board: MiniBASE-10R

      QNX Starter Kits and BSPs

      Starter kit STKa6x

          

      • Starter kit for TQMa6x
      • 1x Ethernet 10/100/1000 Mbit/s
      • 4x USB
      • 1x Dual LVDS
      • 2x CAN

      DIMM-MX6 Dev Kit QNX

            

      • Starter Kit for NXP i.MX6 Quad with QNX and Display
      • CPU-Module: DIMM-MX6
      • Baseboard: Cadun
      • Display Unit UMSH-8272MD
      • Operating System: QNX

      Starterkit STKa53

         

      • 2x Ethernet 10/100 Mbit/s
      • 4x USB
      • 1x Dual LVDS
      • 2x CAN

      DIMM-MX53x Dev Kit QNX

           

      • Starter kit for NXP i.MX537 mit QNX und Display
      • CPU-Module: DIMM-MX53
      • Baseboard: Verno
      • Display Unit UMSH-8272MD
      • Operating System: QNX

      Starter kit STKa335x

            

      • Starter kit for TQMa335x
      • Key functionalities
      • 2x Ethernet 10/100/1000 Mbit/s
      • 4x USB
      • 1x LVDS
      • 2x CAN

      Starterkit STKa28

        

      • Starter kit for TQMa28
      • Key functionalities 
      • 2x Ethernet 10/100 Mbit/s
      • 2x USB
      • 1x RS232
      • 1x RS485
      • 2x CAN

      CoreModule 430

           
        

      • -40°C to +85°C
      • 10/100 Ethernet, 3D Video
      • 4 Serial, 2 USB, 8 GPIOs
      • PC/104 Expansion
      • Ultra Low Power
      • 486 migration

      CM1-BT1 Extreme Rugged™ PC/104 SBC

            

      • Single/Dual-core Intel® Atom™ Processor System-on-Chip
      • Up to 4GB DDR3L at 1333MHz
      • Supports VGA and LVDS
      • GbE (optional 2x GbE)
      • 1x SATA 3Gb/s (optional 2x SATA), 3x USB 2.0, 8x GPIO
      • Extreme Rugged™ operating temperature range: -40°C to +85°C
      • Supports Smart Embedded Management Agent (SEMA) functions

      VxWorks Starter Kits and BSPs

      Starter kit STKa6x

          

      • Starter kit for TQMa6x
      • 1x Ethernet 10/100/1000 Mbit/s
      • 4x USB
      • 1x Dual LVDS
      • 2x CAN

      CM1-BT1 Extreme Rugged™ PC/104 SBC

            

      • Single/Dual-core Intel® Atom™ Processor System-on-Chip
      • Up to 4GB DDR3L at 1333MHz
      • Supports VGA and LVDS
      • GbE (optional 2x GbE)
      • 1x SATA 3Gb/s (optional 2x SATA), 3x USB 2.0, 8x GPIO
      • Extreme Rugged™ operating temperature range: -40°C to +85°C
      • Supports Smart Embedded Management Agent (SEMA) functions

      ReadyBoard 910 EPIC SBC

        
        

      • 2nd/3rd Generation Intel® Core™ i7/i5/i3 Processor
      • Dual Gigabit Ethernet
      • USB 3.0 with SuperSpeed 5Gb/s Data Transfer Rate
      • Analog VGA, LVDS and DVI-D display
      • PCI Express Mini Card socket; PCI-104 expansion
      • Onboard SSD

      Android Starter Kits and BSPs

      DIMM-MX6 Dev Kit Android

         

      • Starter kit for NXP i.MX6 Quad with Android and Display
      • CPU-Module: DIMM-MX6
      • Baseboard: Cadun
      • Display Unit ET0700-KEY
      • Operating System: Android

      emCON-MX6 Dev Kit Android

            

      • Single, dual, quad-core Intel Atom or Celeron Processor System-on-Chip
      • Up to 4GB soldered Dual Channel DDR3L at 1333MHz
      • One DDI channel, one LVDS (optional eDP)
      • Three PCIe x1, GbE
      • Two SATA 3Gb/s, four USB and one USB client
      • Supports Smart Embedded Management Agent (SEMA) functions
      • Extreme Rugged operating temperature: -40C to +85C (optional)
      • Starter kit for development: nanoX-BT starter kit Plus; Carrier Board: MiniBASE-10R

      Windows CE6 Starter Kits and BSPs

      CoreModule 430

             
        

      • -40°C to +85°C
      • 10/100 Ethernet, 3D Video
      • 4 Serial, 2 USB, 8 GPIOs
      • PC/104 Expansion
      • Ultra Low Power
      • 486 migration

      Starterkit STKa28 for i.MX28 TQ modules

              

      • Starter kit for TQMa28
      • 2x Ethernet 10/100 Mbit/s
      • 2x USB
      • 1x RS232
      • 1x RS485
      • 2x CAN

      DIMM-MX257 Dev Kit WEC6

              

      • Starter Kit for NXP i.MX257 with Windows Embedded CE and display
      • CPU-Module: DIMM-MX257
      • Baseboard: Verno
      • Display Unit UMSH-8272MD
      • Operating System: Windows embedded CE

      Windows WEC7 Starter Kits and BSPs

      DIMM-MX6 Dev Kit WEC7

             

      • Starter kit for NXP i.MX6 Quad with WEC7 and Display
      • CPU-Module: DIMM-MX6
      • Baseboard: Cadun
      • Display Unit UMSH-8272MD
      • Operating System: Windows Embedded Compact

      LEC-Starterkit R1

             

      • SMARC compliant LEC-BASE R1 carrier board
      • 7” flat panel 800 x 400 display with assembly and USB touch cable
      • SD card and USB stick
      • Interface cables for camera, GPIO, power management, I2S and SPI
      • AC/DC adapter, power cord and universal socket

      DIMM-MX53x Dev Kit WEC7

            

      • Starter Kit for NXP i.MX53x with WEC 7.0
      • CPU-Module: DIMM-MX53
      • Baseboard: Verno
      • Display Unit UMSH-8272MD
      • Operating System: Windows embedded Compact

      Windows WEC2013 Starter Kits and BSPs

      LEC-Starterkit R1

             

      • SMARC compliant LEC-BASE R1 carrier board
      • 7” flat panel 800 x 400 display with assembly and USB touch cable
      • SD card and USB stick
      • Interface cables for camera, GPIO, power management, I2S and SPI
      • AC/DC adapter, power cord and universal socket

      Starter kit STKa335x

              

      • Starter kit for TQMa335x
      • 2x Ethernet 10/100/1000 Mbit/s
      • 4x USB
      • 1x LVDS
      • 2x CAN

        DIMM-MX53x Dev Kit WEC7

              

        • Starter Kit for NXP i.MX53x with WEC 7.0
        • CPU-Module: DIMM-MX53
        • Baseboard: Verno
        • Display Unit UMSH-8272MD
        • Operating System: Windows embedded Compact

        Windows XP Starter Kits and BSPs

        CoreModule 920 Extreme Rugged™ PCI/104-Express SBC

               

        • Dual-core 3rd Generation Intel® Core™ Processor
        • Up to 4GB industrial grade solder down ECC 1600MHz DDR3 memory
        • One HDMI, one VGA, and one 18/24-bit LVDS display interfaces
        • 8GB industrial grade Solid State Disk
        • One PCIe x16 (Gen 3) and 1 x4 or 4 x1 (Gen 2)
        • Two SATA 6 Gb/s ports, two Gigabit Ethernet, four USB 2.0 interfaces, and two serial ports
        • PCI/104-Express Type 1 and PCI/104 expansion interfaces
        • Extreme Rugged™ operating temperature: -40°C to +85°C

        ReadyBoard 910 EPIC Single Board Computer

              

        • 2nd/3rd Generation Intel® Core™ i7/i5/i3 Processor
        • Dual Gigabit Ethernet
        • USB 3.0 with SuperSpeed 5Gb/s Data Transfer Rate
        • Analog VGA, LVDS and DVI-D display
        • PCI Express Mini Card socket; PCI-104 expansion
        • Onboard SSD

        CM1-86DX2 PC/104 SBC

              

        • Ultra low power, DM&P Vortex86DX2 SoC
        • Full ISA bus support
        • 512MB/1G onboard DDR2 memory
        • 2x Ethernet ports
        • 8x GPIO
        • VGA and 18/24-bit single channel LVDS
        • HD Audio for CM1-86DX2-1G version
        • PCI Express Mini Card and optional MicroSD slot

        Windows 7/8 Starter Kits and BSPs

        Starterkit-COM Express 6 PLUS

               

        • Live Linux USB stick with SEMA pre-installed
        • Schematics, Design Guide, and User Manuals
        • ADLINK USB stick with Documentation, Drivers, BSPs, Libraries
        • Thermal Solution (heatspreader and heatsink)
        • Express-BASE6 Reference Carrier Board
        • COM Express Type 6 Module
        • CPU, Memory

        nanoX Starter Kit Plus

              

        • COM Express® Type 10 core module
        • Thermal solution (heatspreader or heatsink)
        • miniBASE-10R Reference Carrier Board
        • LVDS flat panel evaluation kit (optional)
        • Schematics, Design Guide, and User Manuals
        • ADLINK USB stick with Documentation, Drivers, BSPs, Libraries
        • Live USB with Ubuntu and SEMA

        COM Express Type 2 Starter Kit

              

        • COM Express Type 2 Module
        • CPU, Memory
        • Express-BASE Reference Carrier Board
        • Thermal Solution (heatspreader and heatsink)
        • Schematics, Design Guide, and User Manuals
        • ADLINK USB stick with Documentation, Drivers, BSPs, Libraries

        CM1-BT1 Extreme Rugged™ PC/104 SBC

              

        • Single/Dual-core Intel® Atom™ Processor System-on-Chip
        • Up to 4GB DDR3L at 1333MHz
        • Supports VGA and LVDS
        • GbE (optional 2x GbE)
        • 1x SATA 3Gb/s (optional 2x SATA), 3x USB 2.0, 8x GPIO
        • Extreme Rugged™ operating temperature range: -40°C to +85°C
        • Supports Smart Embedded Management Agent (SEMA) functions

        ReadyBoard 910 EPIC Single Board Computer

              

        • 2nd/3rd Generation Intel® Core™ i7/i5/i3 Processor
        • Dual Gigabit Ethernet
        • USB 3.0 with SuperSpeed 5Gb/s Data Transfer Rate
        • Analog VGA, LVDS and DVI-D display
        • PCI Express Mini Card socket; PCI-104 expansion
        • Onboard SSD

        CM1-86DX2 PC/104 SBC

              

        • Ultra low power, DM&P Vortex86DX2 SoC
        • Full ISA bus support
        • 512MB/1G onboard DDR2 memory
        • 2x Ethernet ports
        • 8x GPIO
        • VGA and 18/24-bit single channel LVDS
        • HD Audio for CM1-86DX2-1G version
        • PCI Express Mini Card and optional MicroSD slot

        AmITX-SL-G

           

        • 6th Gen Intel Core i7/i5/i3, Intel Pentium G4400/G4400TE and Celeron G3900/G3900TE Desktop Processor with Intel® Q170/H110 Chipsets
        • Up to 32 GB dual channel DDR4 at 2133 MHz
        • Intel Gen 9 graphics, 3x DP, LVDS co-lay with eDP (opt.)
        • 1x PCIe x16 (Gen 3), 1x PCIe x1 (Gen 2), 1x full size Mini PCIe + USB or mSATA, 1x half size Mini PCIe + USB, 1x SPI header for external BIOS
        • Q170: 7x USB 3.0, 4x USB 2.0; H110: 4x USB 3.0, 7x USB 2.0

        ETX-BT ETX Module with Intel Atom Processor

             

        • Intel® Atom™ E3800 Series SoC and Celeron N2930/J1900 Processor
        • Up to 4 GB non-ECC DDR3L at 1333 MHz
        • Dual channel 24-bit LVDS and VGA
        • 2x SATA and 2x PATA (M/S), 4x USB 2.0, 10/100 Mbps LAN (GbE via onboard connector)
        • Extreme Rugged operating temperature: -40° to +85° (opt.)
        • Supports Smart Embedded Management Agent (SEMA) function

        CM1-86DX3 PC/104 SBC

              

        • Ultra low power, DM&P Vortex86DX3 SoC
        • Full ISA bus support
        • 2GB soldered DDR3L
        • 1x GbE, 1x Fast Ethernet
        • SATA, CFast
        • VGA and 18/24-bit single channel TTL/TFT
        • Supports Smart Embedded Management Agent (SEMA) functions

        LEC-Starterkit R2

            

        • SMARC compliant LEC-BASE R1 carrier board
        • SD card and USB stick
        • Interface cables (one way open) for camera, GPIO, power management, SPI, I2C and LVDS
        • AC/DC adapter, power cord and universal socket

        Q7-Starterkit R1

             

        • Qseven compliant Q7-BASE R1 carrier board
        • SD card and USB stick
        • 300 Watt ATX power supply

        CoreModule 920

              

        • Dual-core 3rd Generation Intel® Core™ Processor
        • Up to 4GB industrial grade solder down ECC 1600MHz DDR3 memory
        • One HDMI, one VGA, and one 18/24-bit LVDS display interfaces
        • 8GB industrial grade Solid State Disk
        • One PCIe x16 (Gen 3) and 1 x4 or 4 x1 (Gen 2)
        • Two SATA 6 Gb/s ports, two Gigabit Ethernet, four USB 2.0 interfaces, and two serial ports
        • PCI/104-Express Type 1 and PCI/104 expansion interfaces
        • Extreme Rugged™ operating temperature: -40°C to +85°C

        Windows 10 Starter Kits and BSPs

        Starterkit-COM Express 6 PLUS

               

        • Live Linux USB stick with SEMA pre-installed
        • Schematics, Design Guide, and User Manuals
        • ADLINK USB stick with Documentation, Drivers, BSPs, Libraries
        • Thermal Solution (heatspreader and heatsink)
        • Express-BASE6 Reference Carrier Board
        • COM Express Type 6 Module
        • CPU, Memory

        nanoX Starter Kit Plus

              

        • COM Express® Type 10 core module
        • Thermal solution (heatspreader or heatsink)
        • miniBASE-10R Reference Carrier Board
        • LVDS flat panel evaluation kit (optional)
        • Schematics, Design Guide, and User Manuals
        • ADLINK USB stick with Documentation, Drivers, BSPs, Libraries
        • Live USB with Ubuntu and SEMA

        COM Express Type 2 Starter Kit

              

        • COM Express Type 2 Module
        • CPU, Memory
        • Express-BASE Reference Carrier Board
        • Thermal Solution (heatspreader and heatsink)
        • Schematics, Design Guide, and User Manuals
        • ADLINK USB stick with Documentation, Drivers, BSPs, Libraries