We supply diagnostic tools from Softing - providing both PROFIBUS & PROFINET tools. They prevent failures before production grinds to a halt, and quickly sort out issues if your network requires maintenance.
Additionally, the tools can easily be used by staff with both basic and expert engineering knowledge.
Please click on the logos below to be taken to the relevant products for your requirements.
DDL-NL-006018 - PROFIBUS Tester 5 + Oscilloscope Option + PA-Option (+ cable set)
DDL-NN-006012 - PROFIBUS Tester 5 + Oscilloscope Option
DDL-NL-006016 - PROFIBUS Tester 5 + PA-Option (+ cable set)
DDA-NN-006014 - Basic PROFIBUS Tester 5 (BC-700-PB)
LRA-NN-006011 - License Oscilloscope Option
DDL-NL-006010 - License PA-Option (+ cable set)
| ACA-NN-006033 | D-Sub to M12 adapter set with T-piece and M12 bus termination for PROFIBUS DP |
| DDA-ZZ-004010 | Digital Fieldbus Leakage Current Clamp for Locating EMC Problems, 40 ..1000 Hz, MIN/MAX, Data Hold, Measuring Cables, supplied in a Handy Case (fi ts in Empty Compartment of Carrying Case) |
| ACL-NN-006037 | D-Sub Service Interface with Active Bus Termination and 90° Angled Connector for PROFIBUS DP |
| ACA-NN-006034 | M12 Service Interface for PROFIBUS DP, Comprising M12 T-Piece, End Cap and M12 Connection Cable (1 m) |
| ACA-NN-006031 | EIA-485 D-Sub adapter cable for testing operational networks with reduced influence on segment operation |
| TRA-PB-TS | Profibus training |
TH LINK PROFIBUS provides controller-independent access to PROFIBUS networks for plant operation and maintenance staff. The tool supports both network diagnostics applications and plant asset management applications. TH LINK PROFIBUS is easy to use and can be integrated without interfering with the operation of existing installations.
GEA-JN-003006 - TH LINK PROFIBUS
LRA-JY-003024 - TH SCOPE (software key)
LRL-JY-003025 - TH SCOPE (hardware key)
LRA-NN-021980 - DTM Library
VAA-YY-023000 - PACTware
VAA-NM-023001 - TACC
TRA-PB-TS - Training “PROFIBUS Troubleshooting”
Littleton/Englewood Wastewater Treatment Plant
The Diagnostic Monitor is a versatile tool for testing PROFIBUS PA during operation. It is powered by the fieldbus so that no battery or external power source is required. The monitor is also suitable for use in hazardous areas.
TH SCOPE is a software product for industrial network management and network diagnostics. Geared to plant operators and maintenance personnel, TH SCOPE is an all-in-one, easy-to-use solution for permanent monitoring and predictive maintenance, for acceptance testing and for troubleshooting. Combined with TH LINK components, the product supports PROFIBUS, PROFINET, EtherNet/IP and Modbus TCP protocols.
GEA-JN-003006 - TH LINK PROFIBUS
LRA-JY-003024 - TH SCOPE (software key)
LRL-JY-003025 - TH SCOPE (hardware key)
LRA-NN-021980 - DTM Library
VAA-YY-023000 - PACTware
VAA-NM-023001 - TACC
TRA-PB-TS - Training “PROFIBUS Troubleshooting”
Options include:
The MBox-V is an Embedded PC based on Intel® Atom™ processor series E3800 (Bay Trail-I) for embedded applications. The ultra compact integration of the hardware and the chassis enable applications within a very small footprint. The chassis design is very flexible so that the MBox can be used as desktop device or be integrated in cabinets with DIN rail mounting. ODM branding (color, logo, labels,…) is possible.
The MBox-V is focused to realize individual configurations depending on customers demand. Functionality and interfaces can be added easily by internal Mini PCIe add-in cards. Typical uses are found in embedded server and gateway applications, entry level PC systems for automation, visualization and monitoring and all applications that place high demands on quality, durability and long-term availability.
The MBox-V naming indicates the MBox variant with “variable” chassis variant.
TH SCOPE is a software product for industrial network management and network diagnostics. Geared to plant operators and maintenance personnel, TH SCOPE is an all-in-one, easy-to-use solution for permanent monitoring and predictive maintenance, for acceptance testing and for troubleshooting. Combined with TH LINK components, the product supports PROFIBUS, PROFINET, EtherNet/IP and Modbus TCP protocols.
Features
DDA-ZZ-004010
Provides an access point for testing PROFIBUS networks if the D-sub connectors have no service socket or if the stations are connected via terminal block.
Included in Package
Order Number
BC-PBMB-PB-S
Provides an access point for testing PROFIBUS networks with M12 connectors and Allows Testing the Bus During Operation
The service interface is inserted between two bus stations. When not in use, the service output of the T piece is closed with an end cap. At baud rates of 1.5 Mbit/s or higher, use the supplied cable to ensure that the required minimum distance between bus stations is maintained.
T piece (protection class IP68) with end cap and a 1 m DP cable fitted with a male/female M12 connector on each end.
BC-M12DP-PB
The TH LINK PROFINET diagnostics tool makes use of a controller-independent access to monitor PROFINET networks. The diagnostic data is collected in networks comprising up to 254 nodes, and made available to users through the TH SCOPE software application. TH LINK PROFINET is easy to use and can be integrated without interfering with the operation of existing installations.
| Order Numbers | |
|---|---|
| GDA-JA-003034 | TH LINK PROFINET |
| Additional Products and Services | |
|---|---|
| LRA-JY-003024 | TH SCOPE (software key) |
| LRL-JY-003025 | TH SCOPE (hardware key) |
| LRA-JY-003028 | TH LINK PC Industrial Ethernet (software key) |
| LRL-JY-003029 | TH LINK PC Industrial Ethernet (hardware key) |
| GDA-JY-003037 | TH LINK Industrial Ethernet |
| TRA-PN | Training “PROFINET Commissioning and Troubleshooting” |
TH SCOPE is a software product for industrial network management and network diagnostics. Geared to plant operators and maintenance personnel, TH SCOPE is an all-in-one, easy-to-use solution for permanent monitoring and predictive maintenance, for acceptance testing and for troubleshooting. Combined with TH LINK components, the product supports PROFIBUS, PROFINET, EtherNet/IP and Modbus TCP protocols.
| Order Numbers | |
|---|---|
| LRA-JY-003024 | TH SCOPE (software key) |
| LRL-JY-003025 | TH SCOPE (hardware key) |
| Additional Products and Services | |
|---|---|
| GEA-JN-003006 | TH LINK PROFIBUS |
| GDA-JA-003034 | TH LINK PROFINET |
| GDA-JY-003037 | TH LINK Industrial Ethernet |
| LRA-JY-003028 | TH LINK PC Industrial Ethernet |
Options include:
The MBox-V is an Embedded PC based on Intel® Atom™ processor series E3800 (Bay Trail-I) for embedded applications. The ultra compact integration of the hardware and the chassis enable applications within a very small footprint. The chassis design is very flexible so that the MBox can be used as desktop device or be integrated in cabinets with DIN rail mounting. ODM branding (color, logo, labels,…) is possible.
The MBox-V is focused to realize individual configurations depending on customers demand. Functionality and interfaces can be added easily by internal Mini PCIe add-in cards. Typical uses are found in embedded server and gateway applications, entry level PC systems for automation, visualization and monitoring and all applications that place high demands on quality, durability and long-term availability.
The MBox-V naming indicates the MBox variant with “variable” chassis variant.
TH SCOPE is a software product for industrial network management and network diagnostics. Geared to plant operators and maintenance personnel, TH SCOPE is an all-in-one, easy-to-use solution for permanent monitoring and predictive maintenance, for acceptance testing and for troubleshooting. Combined with TH LINK components, the product supports PROFIBUS, PROFINET, EtherNet/IP and Modbus TCP protocols.
The Industrial Ethernet Tester BC-200-ETH is an industrial-strength troubleshooting instrument for cable testing, network and data analysis, and bandwidth assessment of Ethernet networks. It is an ideal tool for commissioning staff, system integrators and maintenance engineers.