hitex_eq
TriCore

 

 

 

 

!

TriCore TC1797 Starter Kit
+Shipping charges
!
MCU Derivates: SAK-TC1797-512F180E
CPU Clock: 180 MHz


Including:

  • TriBoard Hardware
  • USB cable
  • Power Supply
  • Extension Board
  • Getting Started, first 3 Steps to install the Tools, set up your Hardware, write and debug the first program
  • Technical Documentation: e.g. User manuals (System unit and Peripheral unit), Architecture manual, Application notes, Data Sheets, Board Documentation (pdf-version)
  • Evaluation Versions of Development Tools: e.g. Compiler, Debugger from Tool Partners

On-Board Memory:

  • Burst FLASH up to 16 MBytes (default: 4 MBytes),
  • asynchronous SRAM up to 1MBytes (default),
  • optional synchronous SRAM up to 8 MBytes.

Interfaces:

  • One USB connector for ASC0 Interface via virtual COM port, JTAG (OCDS Level1)
  • 16-pin header for JTAG interface (OCDS Level 1)
  • 10-pin header for DAB
  • 2 x 10pin (2x5) header for CAN High Speed Transceiver (CAN0 and CAN1)
  • 2 x SUB-D9 Plug connector for FlexRay
  • Four 80-pin connectors (male) + four 80-pin connectors (female) with all I/O
  • ETK connector (optional)

TriCore TC179x Starter Kit
+Shipping charges
!

MCU Derivatives: SAK-TC1796-256F150E

CPU Clock: 150 MHz

 

Including:

  • TriBoard Hardware 
  • USB cable 
  • Extension Board 
  • Getting Started, first 3 Steps to install the Tools, set up your
  • Hardware, write and debug the first program 
  • Technical Documentation: e.g. User manuals (System unit and Peripheral unit), Architecture manual, Application notes, Data Sheets, Board Documentation (pdf-version) 
  • Evaluation Versions of Development Tools: e.g. Compiler, Debugger from Tool Partners

On-Board Memory: 

  • Burst FLASH up to 16 MBytes (default: 4 MBytes) 
  • Asynchronous SRAM up to 1MBytes (default)
  • Optional synchronous SRAM up to 8 MBytes.

Interfaces:

  • One USB connector for ASC0 Interface via virtual COM port, JTAG (OCDS Level1) 
  • 16-pin header for JTAG interface (OCDS Level 1) 
  • 2 x 10pin (2x5) header for CAN High Speed Transceiver (CAN0 and CAN1) 
  • Four 80-pin connectors (male) + four 80-pin connectors (female) with all I/O signals 
  • 2 x SUB-D9 Plug connector for FlexRay (optional) 
  • ETK connector (optional)

TriCore TC1767 Starter Kit
+Shipping charges
!
MCU Derivatives: SAK-TC1767-256F133HL
CPU Clock: 133 MHz

Including:

  • TriBoard Hardware
  • USB cable
  • Power Supply
  • Extension Board
  • Getting Started, first 3 Steps to install the Tools, set up your Hardware, write and debug the first program
  • Technical Documentation: e.g. User manuals (System unit and Peripheral unit), Architecture manual, Application notes, Data Sheets, Board Documentation (pdf-version)
  • Evaluation Versions of Development Tools: e.g. Compiler, Debugger from Tool Partners 

Interfaces:

  • One USB connector for ASC0 Interface via virtual COM port, JTAG (OCDS Level1)
  • 16-pin header for JTAG interface (OCDS Level 1)
  • 10-pin header for DAB
  • 2 x 10pin (2x5) header for CAN High Speed Transceiver (CAN0 and CAN1)
  • 2 x SUB-D9 Plug connector for FlexRay
  • Four 80-pin connectors (male) + four 80-pin connectors (female) with all I/O signals
  • ETK connector (optional)

TriCore TC176x Starter Kit
+Shipping charges
!

MCU Derivatives:
SAK-TC1766-192F80HL, SAK-TC1762-128F80HL, SAK-TC1762-128F66HL

Also equivalent TC116x derivatives.

 

(The Family Starter Kit is equipped with the SAK-TC1766-192F80HL as superset for the TC176x family)

CPU Clock: 80 MHz

Including:

·         TriBoard Hardware

·         USB cable

·         Extension Board

·         Getting Started, first 3 Steps to install the Tools, set up your Hardware, write and debug the first program

·         Technical Documentation: e.g. User manuals (System unit and Peripheral unit), Architecture manual, Application notes, Data Sheets, Board Documentation (pdf-version)

·         Evaluation Versions of Development Tools: e.g. Compiler, Debugger from Tool Partners

 

Interfaces:

·         One USB connector for ASC0 Interface via virtual COM port, JTAG (OCDS Level1) 

·         16-pin header for JTAG interface (OCDS Level 1) 

·         2 x 10pin (2x5) header for CAN High Speed Transceiver (CAN0 and CAN1) 

·         Four 80-pin connectors (male) + four 80-pin connectors (female) with all I/O signals 

·         2 x SUB-D9 Plug connector for FlexRay (optional) 

·         ETK connector (optional)

TriCore TC1130 Starter Kit
+Shipping charges
!

MCU Derivatives:

All TC1100, TC1115 and TC1130 devices covered by a TC1130 device fitted to the board as a uperset of the other devices.

CPU Clock: 150 MHz

 

On-Board Memory:

  • Burst FLASH up to 64 MBytes (default: 32 MBytes)
  • PC100 SDRAM 2 banks up to 64 MBytes per bank (default: 1 banks with 64 MBytes) or Micron SyncFlash 2 banks with 16 MBytes per bank

 

Interfaces:

  • DB9 for RS232-0
  • BERG10 for RS232-1
  • two BERG10 for CAN-0/1 with Transceiver
  • BERG16 for OCDS1
  • SAMTEC QSH-030-01-F-D-A for OCDS2
  • RJ45 Connector with LED's for Ethernet
  • USB connector (type B) for USB connections
  • DB25 On Board Wiggler for OCDS1
  • four 80-pin connectors (male) with all I/O signals
  • four 80-pin connectors (female) with all I/O signals

HiMOD TC1796 Applications Development Module
+Shipping charges
!
TC1796 TriCore Applications Development Kit, including one HiMOD module and one baseboard