Hitex (UK) Webshop

Interfaces:

USB connector to access the microcontroller JTAG interface for OCDS-debugging.

Virtual COM port provided via USB Interface connected to serial interface ASC0 of XC164CM.

10pin (2x5) header for TwinCAN node A and B, three digital I/O, one analog Input, +5V and GND.

Components:

Three LEDs are used to notify serial communication (yellow), run-mode (green) and a free programmable red LED accessible from XC164CM.

Including:

USB-Stick ready to run with a preflashed CAN-Application to demonstrate CAN based on a simple CAN-Analyzer, which is also included.

CD-ROM with a full development environment consisting of a Compiler and Debugger restricted to the usage with U CAN.

Also included are example projects, training documentation and all technical documentation for the XC164CM (User manuals, Application notes).

No power supply required.

miniMODULE167 starter kit

* Credit card-sized (85 x 55 mm.) SBC
* Infineon C167CR controller (20MHz) with on-chip Full CAN 2.0B
* Instruction cycle time of 100 ns in 16-bit, non-mux bus-mode
* 16MB linear address space
* 256KB (to 2MB) external SRAM
* 256KB (to 2MB) external FLASH
* FLASH supports on-board programming via RS232 interface to 1 MB
* optional EPROM
* All ports & signals extend to standard-width (2.54 mm.) pins aligning edges of the board
* 16-channel A/D-converter with 10-bit resolution
* Battery-backed Real-Time Clock (256 byte internal
SRAM) and SRAM (to 1MB)
* RS232 transceiver supports two serial interfaces
* UART in place of a second asynchronous serial interface (configurable as RS485)
* Full 2.0B CAN interface

nanoMODULE164 starter kit

* SBC with subminiature dimensions (47 x 38 mm.)
* Infineon C164CI controller (20 MHz)
* All C164 signals on 1.27 mm pitch pin connectors at board edges
* 256 (to 1MB) KB external SRAM
* 256 (to 1MB) KB external Flash
* Bootstrap Loader enabling on-board FLASH programming
* 8-channel A/D-converter with 10-bit resolution
* Full 2.0B CAN interface (max. 512KB SRAM and
512 KB FLASH if CAN interface active)
* RS232 interface via UART, additional synchronous Real-Time Clock and Watchdog Timer
* Various Timers supporting Capture/Compare, PWM
* 0° C to +70° C

phyCORE-167CR starter kit

* SBC with subminiature dimensions (55 x 47 mm.)
* Populated with Infineon C167CR with on-chip Full CAN 2.0B
* 256KB (to 1MB) external SRAM
* 256KB (to 2MB) external FLASH supporting In-System Programming (ISP)
*4 (to 32) KB external serial EEPROM (alternatively 256 byte SRAM or 8KB serial FRAM)
* 16-bit multiplexed bus mode
* 16-channel A/D-converter with 10-bit resolution
* Battery-buffered Real-Time Clock and SRAM (to 1MB)
* Two RS232 transceivers, one configurable as RS485
* Optional UART support second asynchronous serial interface
* Two Full 2.0B CAN-bus interfaces via two 82C251 transceivers (if populated with C167CS, otherwise only one CAN interface)
* Interface support of RTS, CTS and DSR modem signals
* +5V/250 mA. power source
* 0° C to +70° C

C167CR / ST10F168 CAN training kit

* Recommended for self-study and higher education.
* EVA16C microcomputer card with C167CR
* User fitment of ST10 versions
* 167IO active training board with:
* 2 x 20char LCD display
* HEX keypad
* 4 x 5A drivers
* Memory-mapped DIL switch
* 5 analog inputs
* Full I/O expansion
* Audio input and output stages + speaker
* C515C digital and CAN signal source
* Local CAN network
* Tutorial notes and exercises

C167CR Ethernet starter kit

This TCP/IP over Ethernet kit includes examples of protocol stacks using US Software’s USNET and CMX’s MicroNET. It also includes a restricted version of the Keil PK166 C compiler and debugger.

* Infineon C167CR CPU
* Devices Supported; Infineon C167CR, C167CS
* ST Microelectronics ST10-167/168
* 16-bit non-multiplexed bus
* Up to 50MHz clock (selected via DIP switch)
* 1MByte SRAM
* 1MByte high-speed (25ns)
* 1MByte FLASH (sockets for AMD27C040)
* 1 x serial port (standard on-chip)
* 2 x CAN ports (single or dual on-chip)
* Ethernet port using the Crystal CS8900A
* Prototyping Area (95mm x 50mm)
* 7.5-9 Volts DC, 300mA

C167CR Ethernet starter kit STK167

* TQ-miniMODULE with Infineon C167CR microcontroller
* 1MB SRAM, 1MB FLASH, EEPROM
* Ethernet interface
* CAN interface
* 7-segment display
* 4 x UARTs
* 280 pin board-to-board connector, 0.8mm pitch, 54 x 54mm
* 0 to 70 degC (-40 to 85 degC)

EASY161u starter kit

* Full-speed USB version 1.1compliant port
* RS232 interface on board
* Two JTAG interfaces for fast access to the On Chip * Debug System
* 1MByte XDATA RAM
* 512kByte FLASH memory
* All controller signals bonded on pins
* Breadboard area
* Device driver for USB
* Infineon USB-Tool for easy USB-host traffic generation

EASY165UTAH starter kit

* Full-speed USB version 1.1compliant port
* RS232 interface on board
* Two JTAG interfaces for fast access to the On Chip Debug System
* 1MByte XDATA RAM
* 512kByte FLASH memory
* All controller signals bonded on pins
* Breadboard area
* Device driver for USB
* Infineon USB-Tool for easy USB-host traffic generation

XC161CJ Starter Kit

CPU Clock:

40 MHz

 

On-Chip Memory:

6 kByte SRAM,

128 kByte FLASH

 

On-Board Memory:

2 x 512kByte SRAM (+ optional: 2 x up to 1 MB Flash)

 

Interfaces:

- SUB-D9 connector for ASC0 Interface via RS 232 port

- 10pin header (2x5) for ASC1 Interface (second RS 232 port)

- Sub-D25 connector (on-board wiggler) and 16-pin header for JTAG interface

- Two 10pin (2x5) Headers connected to the TwinCAN Module

- Six additional connectors (bus expansion, ADC/GPIO, peripherals and CAPCOM unit)

 

Includes:

- Technical Documentation: e.g. User manuals (System unit and Peripheral unit), Architecture manual, Application notes, Errata sheets, Data Sheets, Board Documentation (pdf version),

- Low Level Driver Software (LLD),

- Evaluation Versions of Keil, Tasking and Hitex Development Tools: e.g. Compiler, Debugger, Operating System, DAvE Derivative Implementation Files (DIP), MemTool (Flash Programming Tool),

- Training Documentation, Demo Programs, Hands On Training (HOT),

- LPT parallel cable,

- Starter Kit Manual

- Extension board.