Phycore ARM-based training kit, as used in Hitex training courses. 

32-Bit RISC Microcontroller in uBGA-package, Subminiature Single Board Computer in 53 x 60 mm dimensions according to low EMI phyCORE design 32-bit RISC Atmel AT91M55800A ARM7 (µBGA-package) controller and other signals extend to 200 pins on two high-density (0.635 mm) Molex connectors aligning two undersides of the board Flash: 4 MB µBGA-package In-System-Programmable (ISP) SRAM: up to 1 MB µBGA-package Serial: 2KB EEPROM (SPI), alternatively FRAM 16-bit external data bus SRAM battery back-up support RS-232 transceiver supports 3x asynchronous serial interfaces JTAG-Interface

GPIO Training Board

v8x LEDs
Crimp connectors enabling easy connection to peripherals
Galvanically isolated 8-position input clamp connector
Connector for LCD display
8x LEDs
6x color-coded push buttons
8-pin DIP-switch (high-active)
3x potentiometers
DC motor with photoelectric barrier for measuring RPM, suitable for setting up a speed control loop
Wire wrap field on 2.54 mm pitch for integration of user-defined hardware and circuitry

The kit includes the Keil uVISION3-ARM compiler/IDE. For debugging, we recommend the STKPS-ARM generic ARM7 package, as used on our courses.

Keil uVISION3 ARM compiler/debugger, evaluation board, uLINK USB/JTAG interface 9v PSU
28kbyte/s download speed, FLASH programming, 16k code limit.

Development Kit For Philips LPC2130 Series with:

Keil uVISION3 ARM compiler/debugger, evaluation board, uLINK USB/JTAG interface 9v PSU
28kbyte/s download speed, FLASH programming, 16k code limit.

Development Kit For Philips LPC2140 Series with:

Keil uVISION3 ARM compiler/debugger, evaluation board, uLINK USB/JTAG interface 9v PSU
28kbyte/s download speed, FLASH programming, 16k code limit.

High performance starter kit for ST STR710F

Contents:

Tantino for ARM7-9 JTAG debugger

Evaluation Board for ARM with STMicroelectronics ARM7 STR710F microcontroller

Quick Start Guide

Detailed "Insider's Guide To STRxxx devices with code examples and tutorial

An installation CD with
- Windows based HiTOP5 IDE * (compatible with all Hitex tools)
- GNU C-Compiler (FreeWare)
- Examples
- electronic user manual
- Hitex Instruction Set Simulator for ARM – HiSIM *

Power supply
JTAG and power supply cable
* Software with limitation up to 16 kByte of ARM code.

High performance starter kit for ST STR730F

Contents:

Tantino for ARM7-9 JTAG debugger

Evaluation Board for ARM with STMicroelectronics ARM7 STR730F

Quick Start Guide

Detailed "Insider's Guide To STRxxx devices with code examples and tutorial

An installation CD with
- Windows based HiTOP5 IDE * (compatible with all Hitex tools)
- GNU C-Compiler (FreeWare)
- Examples
- electronic user manual
- Hitex Instruction Set Simulator for ARM – HiSIM *

Power supply
JTAG and power supply cable
* Software with limitation up to 16 kByte of ARM code.

High performance starter kit for ST STR912F Family

Suitable for STR912FW44, STR912FW42, STR911FM44, STR911FM42, STR910FW32, STR910FM32 projects.
 
The STR912F is based on the powerful ARM966E-S core and combines standard peripherals such as USB, CAN, timer and RTC with Ethernet-MAC and large SRAM and FLASH memories. With up to 96 MHz internal clock the controller is well-suited for industrial control applications.

The starter kit contains all the necessary hard- and software components to start the evaluation quick and easy. Besides an evaluation board equipped with a STR912F microcontroller, the USB-based “Tantino for ARM7-9” JTAG-debugger is included. Further components are: Quick Start Guide and a CD with the HiTOP development environment including examples, GNU compiler, HiSIM ARM instruction-set simulator and the software test tool Tessy. The evaluation software is limited to a code size of 16 KByte but can be upgraded to an unlimited version to meet support large application development.

Contents:

Tantino for ARM7-9 JTAG debugger

Evaluation Board for ARM with STMicroelectronics ARM7 STR730F

Quick Start Guide

Detailed "Insider's Guide To STRxxx devices with code examples and tutorial

An installation CD with
- Windows based HiTOP5 IDE * (compatible with all Hitex tools)
- GNU C-Compiler (FreeWare)
- Examples
- electronic user manual
- Hitex Instruction Set Simulator for ARM – HiSIM *

Power supply
JTAG and power supply cable
* Software with limitation up to 16 kByte of ARM code.

Development Kit For ST STR912F Series with:

Keil RealView/uVISION3 ARM compiler/debugger, evaluation board, uLINK USB/JTAG interface 9v PSU 28kbyte/s download speed, FLASH programming, 16k code limit.

Development Kit For NXP LPC2368 Series with:

Keil uVISION3 ARM compiler/debugger, evaluation board, uLINK USB/JTAG interface 9v PSU
28kbyte/s download speed, FLASH programming, 16k code limit.

Development Kit For NXP LPC2378 Series with:

Keil uVISION3 ARM compiler/debugger, evaluation board, uLINK USB/JTAG interface 9v PSU
28kbyte/s download speed, FLASH programming, 16k code limit.

Development Kit For NXP LPC2130 Series with:

Keil uVISION3 ARM compiler/debugger, evaluation board, uLINK USB/JTAG interface 9v PSU
28kbyte/s download speed, FLASH programming, 16k code limit.

Development Kit For NXP LPC2103 Small CPU Series with:

Keil uVISION3 ARM compiler/debugger, evaluation board, uLINK USB/JTAG interface 9v PSU
28kbyte/s download speed, FLASH programming, 16k code limit.

Development Kit For ST Microelectronics STR912FW44 CPU Series with:

Keil uVISION3 ARM compiler/debugger, evaluation board, uLINK USB/JTAG interface 9v PSU
28kbyte/s download speed, FLASH programming, 16k code limit.

This Starter Kit contains everything you need to setup your first ARM project and get familiarized with the ARM architecture at low cost. To have an easy and quick start the package includes an Evaluation Board from Hitex, a Quick Start Guide, a GNU Compiler, an ARM Simulator, the Hitex Tantino debug tool and examples.

The Starter Kit for ARM includes:
- Tantino for ARM7-9 JTAG debugger
- Hitex Evaluation Board for ARM with ST Microelectronics ARM7 microcontroller STR750F
- Quick Start Guide
- An installation CD with windows based HiTOP5 IDE * (compatible with all Hitex tools)
--- GNU C-Compiler (FreeWare)
--- Examples
--- electronic user manual
--- Hitex Instruction Set Simulator for ARM – HiSIM
- Power supply
- JTAG and power supply cable

* Software with limitation to 16 kByte of ARM code 

The Keil MCBSTR750 Evaluation Board introduces you to the STMicroelectronics STR750 ARM family and allows you to create and test working programs for this advanced architecture.

The Keil MCBSTR750 Evaluation Board connects to your PC using the serial port (for Flash download) or the JTAG interface (for program debug using the Keil uLINK and the µVision IDE and Debugger).

Two serial interfaces, a speaker, analog input (via potentiometer), one CAN interfaces, LCD, USB, and eight LEDs make this board a great starting point for your next ARM project.