XC16x, C166/C167 & ST10 families

Home > Kits, Modules & Development Boards

These starter kits are complete and ready to use. They include the CPU module and baseboard, plus evaluation C compiler, debugger and example applications.

KMM-311

miniMODULE167 starter kit

* Credit card-sized (85 x 55 mm.) SBC
* Infineon C167CR controller (20MHz) with on-chip Full CAN 2.0B
* Instruction cycle time of 100 ns in 16-bit, non-mux bus-mode
* 16MB linear address space
* 256KB (to 2MB) external SRAM
* 256KB (to 2MB) external FLASH
* FLASH supports on-board programming via RS232 interface to 1 MB
* optional EPROM
* All ports & signals extend to standard-width (2.54 mm.) pins aligning edges of the board
* 16-channel A/D-converter with 10-bit resolution
* Battery-backed Real-Time Clock (256 byte internal
SRAM) and SRAM (to 1MB)
* RS232 transceiver supports two serial interfaces
* UART in place of a second asynchronous serial interface (configurable as RS485)
* Full 2.0B CAN interface

KMM-311

Weight: 2.00 kg

KNM-264

nanoMODULE164 starter kit

* SBC with subminiature dimensions (47 x 38 mm.)
* Infineon C164CI controller (20 MHz)
* All C164 signals on 1.27 mm pitch pin connectors at board edges
* 256 (to 1MB) KB external SRAM
* 256 (to 1MB) KB external Flash
* Bootstrap Loader enabling on-board FLASH programming
* 8-channel A/D-converter with 10-bit resolution
* Full 2.0B CAN interface (max. 512KB SRAM and
512 KB FLASH if CAN interface active)
* RS232 interface via UART, additional synchronous Real-Time Clock and Watchdog Timer
* Various Timers supporting Capture/Compare, PWM
* 0° C to +70° C

KNM-264

Weight: 2.00 kg

KC-164-SK-164

kitCON164CI starter kit

* Infineon C164CI 16-bit controller
* (20MHz, QFP-100 package)
* 64KB (to 1MB) SRAM
* 256KB (to 1MB) FLASH
* on-chip Bootstrap Loader
* On-board generation of programming voltage to
program on-chip OTP memory
* 8-channel A/D-converter with 10-bit resolution
* RS232 DB-9 serial interface
* RS485/CAN DB-9 serial interface (CAN is only active)
* KC-164-SK-164 kitCON-164
* C164CI/20 MHz, 64KB SRAM

KC-164-SK-164

Weight: 2.00 kg

KC-161-SK-161O

kitCON161O starter kit

* Infineon C161O (16 MHz) in QFP-80 package
* (optional C161V, C161K)
* 64KB (to 1MB) SRAM
* 256KB (to 1MB) FLASH
* on-board Bootstrap Loader
* operates in 16-bit MUX and Non-MUX bus-mode
* RS232 DB-9 serial interface
* supplemental RS232/debug DB-9 interface
* 2 status LEDs and 6 freely-programmable LEDs

KC-161-SK-161O

Weight: 2.00 kg

KC-160-SK-161PI

kitCON161P starter kit

* Infineon C161PI/RI (25 MHz, QFP-100)
* 64KB (to 1 MB) SRAM
* 256KB (to 1 MB) FLASH
* RS232 DB-9 serial interface
* supplemental RS232/debug DB-9 interface
* I2C-bus supporting various components, such as Real-Time Clock, EEPROM memory and expansion I/Os
* two status LEDs and 16 freely-programmable LEDs

KC-160-SK-161PI

Weight: 2.00 kg

KPCM-009

phyCORE-167CR starter kit

* SBC with subminiature dimensions (55 x 47 mm.)
* Populated with Infineon C167CR with on-chip Full CAN 2.0B
* 256KB (to 1MB) external SRAM
* 256KB (to 2MB) external FLASH supporting In-System Programming (ISP)
*4 (to 32) KB external serial EEPROM (alternatively 256 byte SRAM or 8KB serial FRAM)
* 16-bit multiplexed bus mode
* 16-channel A/D-converter with 10-bit resolution
* Battery-buffered Real-Time Clock and SRAM (to 1MB)
* Two RS232 transceivers, one configurable as RS485
* Optional UART support second asynchronous serial interface
* Two Full 2.0B CAN-bus interfaces via two 82C251 transceivers (if populated with C167CS, otherwise only one CAN interface)
* Interface support of RTS, CTS and DSR modem signals
* +5V/250 mA. power source
* 0° C to +70° C

KPCM-009

Weight: 2.00 kg

KPCM-009-C1

phyCORE-167CS starter kit

* SBC with subminiature dimensions (55 x 47 mm.)
* Populated with Infineon C167CS controller with dual on-chip Full CAN 2.0B
* 256KB (to 1MB) external SRAM
* 256KB (to 2MB) external FLASH supporting In-System Programming (ISP)
* 4 (to 32) KB external serial EEPROM (alternatively 256 byte SRAM or 8KB serial FRAM)
* 16-bit multiplexed bus mode
* 16-channel A/D-converter with 10-bit resolution
* Battery-buffered Real-Time Clock and SRAM (to 1MB)
* Two RS232 transceivers, one configurable as RS485
* Optional UART support second asynchronous serial interface
* Two Full 2.0B CAN-bus interfaces via two 82C251 transceivers (if populated with C167CS, otherwise only one CAN interface)
* Interface support of RTS, CTS and DSR modem signals
* +5V/250 mA. power source
* 0° C to +70° C

KPCM-009-C1

Weight: 2.00 kg

phyCORE-161CS starter kit

phyCORE-161CS starter kit

* SBC with subminiature dimensions (55 x 47 mm.)
* Populated with Infineon C161CS controller with dual on-chip Full CAN 2.0B
* 256KB (to 1MB) external SRAM
* 256KB (to 2MB) external FLASH supporting In-System Programming (ISP)
* 4 (to 32) KB external serial EEPROM (alternatively 256 byte SRAM or 8KB serial FRAM)
* 16-bit multiplexed bus mode
* 16-channel A/D-converter with 10-bit resolution
* Battery-buffered Real-Time Clock and SRAM (to 1MB)
* Two RS232 transceivers, one configurable as RS485
* Optional UART support second asynchronous serial interface
* Two Full 2.0B CAN-bus interfaces via two 82C251 transceivers (if populated with C167CS, otherwise only one CAN interface)
* Interface support of RTS, CTS and DSR modem signals
* +5V/250 mA. power source
* 0° C to +70° C

phyCORE-161CS starter kit

Weight: 2.00 kg

phyCORE-163 starter kit

phyCORE-163 starter kit

* SBC with subminiature dimensions (55 x 47 mm.)
* Populated with Infineon C163 with on-chip Full CAN
* 256KB (to 1MB) external SRAM
* 256KB (to 2MB) external FLASH supporting In-System Programming (ISP)
* 4 (to 32) KB external serial EEPROM (alternatively 256 byte SRAM or 8KB serial FRAM)
* 16-bit multiplexed bus mode
* 16-channel A/D-converter with 10-bit resolution
* Battery-buffered Real-Time Clock and SRAM (to 1MB)
* Two RS232 transceivers, one configurable as RS485
* Optional UART support second asynchronous serial interface
* Two Full 2.0B CAN-bus interfaces via two 82C251 transceivers (if populated with C167CS, otherwise only one CAN interface)
* Interface support of RTS, CTS and DSR modem signals
* +5V/250 mA. power source
* 0° C to +70° C

phyCORE-163 starter kit

Weight: 2.00 kg

KC-167-SK-167CR

kitCON167CR starter kit (64kb RAM)

* Infineon C167CR (ROMless)
* 64KB SRAM
* 256KB external FLASH
* on-chip Bootstrap Loader
* RS232 DB-9 serial interface, RS485/CAN DB-9
* CAN DB-9 interface (C167CS only)
* two status LEDs and 16 freely-programmable LEDs

KC-167-SK-167CR

Weight: 2.00 kg

kitCON167CR starter kit (256kb RAM)

kitCON167CR starter kit (256kb RAM)

* Infineon C167CR (ROMless)
* 256KB SRAM
* 256KB external FLASH
* on-chip Bootstrap Loader
* RS232 DB-9 serial interface, RS485/CAN DB-9
* CAN DB-9 interface (C167CS only)
* two status LEDs and 16 freely-programmable LEDs

POA

kitCON167CR starter kit (256kb RAM)

Weight: 2.00 kg

kitCON167CS starter kit (256kb RAM)

kitCON167CS starter kit (256kb RAM)

* Infineon C167CS (ROMless)
* 256KB SRAM
* 256KB external FLASH
* on-chip Bootstrap Loader
* RS232 DB-9 serial interface, RS485/CAN DB-9
* CAN DB-9 interface (C167CS only)
* two status LEDs and 16 freely-programmable LEDs

POA

kitCON167CS starter kit (256kb RAM)

Weight: 2.00 kg

KC-167-CT8

kitCONST10F168 starter kit

* ST Microelectronics ST10F168 controller (20MHz,
QFP-144 package) offering 256KB on-chip FLASH
* 256KB (to 2MB) SRAM
* 256KB (to 2MB) FLASH
* On-chip Bootstrap Loader
* RS232 DB-9 serial interface
* RS485/CAN DB-9 interface
* Three free Chip-Select signals
* Real-Time Clock
* Two status LEDs and 16 freely-programmable LEDs

KC-167-CT8

Weight: 2.00 kg

KPCM-009-C2

phyCORE-ST10F168 starter kit

* Subminiature SBC (55 x 47 mm) with low EMI
* ST10F168 microcontroller with CAN and 256KB on-chip FLASH
* All signals extend to dual-row 200-pin 0.635 mm Molex connectors
* 256KB (to1MB) external SRAM
* 256KB (to 2MB) external FLASH supporting In-System Programming
* 4 (to 32) KB external serial EEPROM (alternatively
256byte SRAM or 8KB serial FRAM)
* 16-bit multiplexed bus mode
* 16-channel A/D-converter with 10-bit resolution
* Battery-buffered Real-Time Clock and SRAM (to 1MB)
* Two RS232 transceivers, one configurable as RS485
* Optional UART support second asynchronous serial interface
* two Full 2.0B CAN-bus interfaces via two 82C251
* +5V./250 mA. power source
* 0° C to +70° C

KPCM-009-C2

Weight: 2.00 kg

C167CR/ST10F168 CAN training kit

C167CR / ST10F168 CAN training kit

* Recommended for self-study and higher education.
* EVA16C microcomputer card with C167CR
* User fitment of ST10 versions
* 167IO active training board with:
* 2 x 20char LCD display
* HEX keypad
* 4 x 5A drivers
* Memory-mapped DIL switch
* 5 analog inputs
* Full I/O expansion
* Audio input and output stages + speaker
* C515C digital and CAN signal source
* Local CAN network
* Tutorial notes and exercises

C167CR/ST10F168 CAN training kit

Weight: 2.00 kg

C167CR starter kit/development board

C167CR starter kit/development board

* All active components are socketed, including CPU
* 1 wait state 2 SRAMs (2*128K*8)
* Power supply 220VAC
* RS232C cable
* Adaptor 9/25 D-type
* All CPU signals on 160-pin female-connector
* 5MHz clock (PLL x4)

C167CR starter kit/development board

Weight: 2.00 kg

C167CR Ethernet starter kit

C167CR Ethernet starter kit

This TCP/IP over Ethernet kit includes examples of protocol stacks using US Software’s USNET and CMX’s MicroNET. It also includes a restricted version of the Keil PK166 C compiler and debugger.

* Infineon C167CR CPU
* Devices Supported; Infineon C167CR, C167CS
* ST Microelectronics ST10-167/168
* 16-bit non-multiplexed bus
* Up to 50MHz clock (selected via DIP switch)
* 1MByte SRAM
* 1MByte high-speed (25ns)
* 1MByte FLASH (sockets for AMD27C040)
* 1 x serial port (standard on-chip)
* 2 x CAN ports (single or dual on-chip)
* Ethernet port using the Crystal CS8900A
* Prototyping Area (95mm x 50mm)
* 7.5-9 Volts DC, 300mA

C167CR Ethernet starter kit

Weight: 2.00 kg

C167CR Ethernet starter kit STK167

C167CR Ethernet starter kit STK167

* TQ-miniMODULE with Infineon C167CR microcontroller
* 1MB SRAM, 1MB FLASH, EEPROM
* Ethernet interface
* CAN interface
* 7-segment display
* 4 x UARTs
* 280 pin board-to-board connector, 0.8mm pitch, 54 x 54mm
* 0 to 70 degC (-40 to 85 degC)

C167CR Ethernet starter kit STK167

Weight: 2.00 kg

EASY161 starter kit

EASY161u starter kit

* Full-speed USB version 1.1compliant port
* RS232 interface on board
* Two JTAG interfaces for fast access to the On Chip * Debug System
* 1MByte XDATA RAM
* 512kByte FLASH memory
* All controller signals bonded on pins
* Breadboard area
* Device driver for USB
* Infineon USB-Tool for easy USB-host traffic generation

EASY161 starter kit

Weight: 2.00 kg

EASY165UTAH starter kit

EASY165UTAH starter kit

* Full-speed USB version 1.1compliant port
* RS232 interface on board
* Two JTAG interfaces for fast access to the On Chip Debug System
* 1MByte XDATA RAM
* 512kByte FLASH memory
* All controller signals bonded on pins
* Breadboard area
* Device driver for USB
* Infineon USB-Tool for easy USB-host traffic generation

EASY165UTAH starter kit

Weight: 2.00 kg

KPCM-010

phyCORE-TC1775starter kit

* Subminiature SBC with low EMI
* TC1775 microcontroller with CAN
* All signals extend to dual-row 200-pin 0.635 mm Molex connectors
* 2MB external SRAM
* 1MB external FLASH supporting In-System (alternatively
256byte SRAM or 8KB serial FRAM)
* 16-bit demultiplexed bus mode
* 32-channel A/D-converter with 12-bit resolution
* Battery-buffered Real-Time Clock and SRAM (to 1MB)
* Two RS232 transceivers, one configurable as RS485
* Optional UART support second asynchronous serial interface
* two Full 2.0B CAN-bus interfaces via two 82C251
* +5V./250 mA. power source
* 0° C to +70° C

KPCM-010

Weight: 2.00 kg

XC161CJ Starter Kit

XC161CJ Starter Kit

XC161CJ Starter Kit

CPU Clock:

40 MHz

On-Chip Memory:

6 kByte SRAM,

128 kByte FLASH

On-Board Memory:

2 x 512kByte SRAM (+ optional: 2 x up to 1 MB Flash)

Interfaces:

- SUB-D9 connector for ASC0 Interface via RS 232 port

- 10pin header (2x5) for ASC1 Interface (second RS 232 port)

- Sub-D25 connector (on-board wiggler) and 16-pin header for JTAG interface

- Two 10pin (2x5) Headers connected to the TwinCAN Module

- Six additional connectors (bus expansion, ADC/GPIO, peripherals and CAPCOM unit)

Includes:

- Technical Documentation: e.g. User manuals (System unit and Peripheral unit), Architecture manual, Application notes, Errata sheets, Data Sheets, Board Documentation (pdf version),

- Low Level Driver Software (LLD),

- Evaluation Versions of Keil, Tasking and Hitex Development Tools: e.g. Compiler, Debugger, Operating System, DAvE Derivative Implementation Files (DIP), MemTool (Flash Programming Tool),

- Training Documentation, Demo Programs, Hands On Training (HOT),

- LPT parallel cable,

- Starter Kit Manual

- Extension board.

XC161CJ Starter Kit

Weight: 2.00 kg

XC164CS Starter Kit

XC164CS Starter Kit

CPU Clock:

40 MHz

On-Chip Memory:

6 kByte SRAM,

128 kByte FLASH

On-Board Memory:

2 x 512kByte SRAM (+ optional: 2 x up to 1 MB Flash)

Interfaces:

- SUB-D9 connector for ASC0 Interface via RS 232 port

- 10pin header (2x5) for ASC1 Interface (second RS 232 port)

- Sub-D25 connector (on-board wiggler) and 16-pin header for JTAG interface

- Two 10pin (2x5) Headers connected to the TwinCAN Module

- Six additional connectors (bus expansion, ADC/GPIO, peripherals and CAPCOM unit)

Includes:

- Technical Documentation: e.g. User manuals (System unit and Peripheral unit), Architecture manual, Application notes, Errata sheets, Data Sheets, Board Documentation (pdf version),

- Low Level Driver Software (LLD),

- Evaluation Versions of Keil, Tasking and Hitex Development Tools: e.g. Compiler, Debugger, Operating System, DAvE Derivative Implementation Files (DIP), MemTool (Flash Programming Tool),

- Training Documentation, Demo Programs, Hands On Training (HOT),

- LPT parallel cable,

- Starter Kit Manual

- Extension board.

XC164CS Starter Kit

Weight: 2.00 kg

XC167CI Starter Kit

XC167CI Starter Kit

XC167CI Starter Kit

CPU Clock:

40 MHz

On-Chip Memory:

6 kByte SRAM,

128 kByte FLASH

On-Board Memory:

2 x 512kByte SRAM (+ optional: 2 x up to 1 MB Flash)

Interfaces:

- SUB-D9 connector for ASC0 Interface via RS 232 port

- 10pin header (2x5) for ASC1 Interface (second RS 232 port)

- Sub-D25 connector (on-board wiggler) and 16-pin header for JTAG interface

- Two 10pin (2x5) Headers connected to the TwinCAN Module

- Six additional connectors (bus expansion, ADC/GPIO, peripherals and CAPCOM unit)

Includes:

- Technical Documentation: e.g. User manuals (System unit and Peripheral unit), Architecture manual, Application notes, Errata sheets, Data Sheets, Board Documentation (pdf version),

- Low Level Driver Software (LLD),

- Evaluation Versions of Keil, Tasking and Hitex Development Tools: e.g. Compiler, Debugger, Operating System, DAvE Derivative Implementation Files (DIP), MemTool (Flash Programming Tool),

- Training Documentation, Demo Programs, Hands On Training (HOT),

- LPT parallel cable,

- Starter Kit Manual

- Extension board.

XC167CI Starter Kit

Weight: 2.00 kg

XC164S/N/D Starter Kit

XC164S/N/D Starter Kit

XC164S/N/D Starter Kit For SAF-XC164S, XC164D, XC164N

CPU Clock:
40 MHz